LED补光对水稻秧苗素质及其生理特征和产量的影响

采用发光二极管(light-emitting diode,LED)精确调制光谱能量,研究不同光质对水稻秧苗素质(株高、根长和鲜干重)和生理特征(内源激素、抗氧化酶、可溶性蛋白和丙二醛)的影响,探讨生理特征与秧苗素质和补光移栽后产量的耦合关系。水稻秧苗分别在5种光质下进行补光照射:R (100%红光),B (100%蓝光),RB (80%红光+20%蓝光)RBG_12.5(62.5%红光+25%蓝光+12.5%绿光),RBG₂₅(50%红光+25%蓝光+25%绿光),光量子通量均为1 000μmol·m^-2·s^-1,照射30 d (6 h/d)后采样,并插秧至稻田,以无补光作为对照(CK)。与CK相比,LED补充光源显著(P<0.05)影响水稻秧苗的株高、根长和鲜干重。株高和地上部分干重最大值分别出现在R和RBG_12.5处理,而根长和地下部分干重的最大值均出现在RBG_12.5处理。LED补充光源对内源激素、抗氧化酶、可溶性蛋白和丙二醛的影响程度因光质和植物部位而异。与CK相比,RBG_12.5二显著(P<0.05)提高地上部生长素(IAA)含量和可溶性蛋白含量,B显著(P<0.05)提高地上部超氧化歧化酶(SOD)活性、过氧化物酶(POD)活性和丙二醛(MDA)含量;RBG_12.5和RBG₂₅显著(P<0.05)提高地下部IAA含量,RBC₂₅显著(P<0.05)提高地下部可溶性蛋白含量和MDA含量。补光移栽后水稻产量的变化趋势与光质对水稻秧苗壮苗指数的影响趋势一致:RBG_12.5> RBG25> RB> B> R> CK。逐步回归分析发现,壮苗指数与地上部赤霉素(GA_3)含量和IAA含量及地下部IAA含量和SOD活性显著正相关;补光移栽后产量与秧苗地上部IAA含量及地下部IAA含量和过氧化氢酶(CAT)活性显著正相关。LED补充光源通过调节水稻秧苗生理特征影响其素质,且影响效应延续至水稻成熟期。RBG_12.5光源更利于培育水稻壮苗和水稻增产,适宜用作工厂化育秧的补充光源。     

Transport of cadmium from soil to grain in cereal crops: A review

Due to rapid urbanization and industrialization, many soils for crop production are contaminated by cadmium(Cd), a heavy metal highly toxic to many organisms. Cereal crops such as rice, wheat, maize, and barley are the primary dietary source of Cd for humans, and reducing Cd transfer from soil to their grains is therefore an important issue for food safety. During the last decade, great progress has been made in elucidating the molecular mechanisms of Cd transport, particularly in rice. Inter-and intraspecific variations in Cd accumulation have been observed in cereal crops. Transporters for Cd have been identified in rice and other cereal crops using genotypic differences in Cd accumulation and mutant approaches. These transporters belong to different transporter families and are involved in the uptake, vacuolar sequestration, root-to-shoot translocation, and distribution of Cd. Attempts have been made to reduce Cd accumulation in grains by manipulating these transporters through overexpression or knockout of the transporter genes, as well as through marker-assisted selection breeding based on genotypic differences in Cd accumulation in the grains. In this review, we describe recent progress on molecular mechanisms of Cd accumulation in cereal crops and compare different molecular strategies for minimizing Cd accumulation in grains.     

垄畦覆膜种行覆土党参种苗移栽机的设计与试验

针对党参覆膜移栽无机可用的问题,结合西北黄土高原旱区党参垄畦覆膜、种行覆土抗逆栽培模式,设计了一种具有开沟、播苗、起垄、整形、覆膜、种行覆土功能的党参种苗移栽机。对样机关键部件进行了分析与设计,确定了尖角长翼型开沟器、整形镇压、膜上覆土等装置的结构及工作参数,解析了核心部件作业机理。田间试验表明,设计的垄畦覆膜、种行覆土党参种苗移栽机埋苗率为4.1%,露苗率为2.6%,栽植合格率为92.0%,栽植深度合格率为87.5%,膜边覆土厚度合格率为95.9%,膜边覆土宽度合格率为96.3%,生产率约为0.14 hm~2·h~(-1)。田间性能试验指标均达到国家和行业标准要求,试验结果满足设计要求。     

干旱胁迫对药用绿化植物千里光和密蒙花生长的影响研究

为筛选利用抗旱性较高的乡土植物用于边坡生态修复,通过盆栽试验研究滇中地区常见的密蒙花和千里光在干旱胁迫条件下的抗旱性,对干旱胁迫下植株的生长状况及各种酶活性、丙二醛和脯氨酸含量等有关生理指标进行研究。结果表明,在断水干旱胁迫下,千里光幼苗忍耐干旱环境的能力强;密蒙花幼苗在断水干旱胁迫前期调节能力较好,在后期抗旱能力减弱,植株生长受到严重抑制。     

不同基质处理对淡水浇灌桐花树成苗率及幼苗生长的影响

为探索桐花树的淡水化人工培育技术以及筛选适宜的基质,以塘泥、黄心土、河沙和椰糠为试验材料,通过不同的配比组合成10种混配基质,并进行育苗试验,对桐花树的成苗率以及生长情况进行研究。结果发现,不同的混配基质对桐花树的成苗率、苗高、地径、根系生长、鲜重和干重等指标有明显的影响,其中以基质F（30%塘泥+50%黄心土+10%河沙+10%椰糠）综合得分最高,其平均苗高、地径、主根长、一级侧根数、全株生物量、成苗率分别比综合得分最低的基质高24.3%、11.1%、6.3%、6.5%、37.5%、2.0%。     

不同浓度NAA/6BA配比对不同品种甘薯茎尖培养特性的影响

为明确不同品种甘薯茎尖培养的最佳NAA/6BA配比,设置0.1 mg/L/2.5 mg/L、0.2 mg/L/2.5 mg/L、0.2 mg/L/1.0 mg/L 3组NAA/6BA浓度配比处理,观测不同浓度激素处理对‘北京553’、‘红香蕉’、‘苏薯8号’、‘烟薯25’、‘安吉芋’、‘济徐23’、‘渝紫7号’、‘商薯19’茎尖培养成苗率、愈伤组织直径、不定根数目、叶片数和植株高度的影响,同时调查不同品种试管苗的移栽成活率。结果表明,‘红香蕉’、‘济徐23’、‘渝紫7号’、‘商薯19’在0.1 mg/L/2.5 mg/L的处理下培养效率最高;‘安吉芋’在0.2 mg/L/2.5 mg/L的处理下培养效率最高;‘苏薯8号’、‘北京553’、‘烟薯25’在0.2 mg/L/1.0 mg/L的处理下培养效率最高。因此,在甘薯茎尖培养过程中,不同甘薯品种适宜的NAA/6BA配比存在显著差异,在实际生产中应根据品种特性来进行调整激素的用量和比例。     

种植密度对2个青稞品种抗倒伏及秸秆饲用特性的影响

种植密度是影响青稞抗倒伏和秸秆饲用特性的重要因子。以抗倒伏品种昆仑14号和倒伏品种门源亮蓝为试验材料,比较研究种植密度对这2个品种生长发育、抗倒伏特性和秸秆饲用特性的影响。结果表明,种植密度对2个品种的抗倒伏和秸秆饲用特性的影响存在差异。随着种植密度的增加,昆仑14号根长、根体积、根数和根干重先增后降,茎粗和壁厚依次下降;门源亮蓝根系和茎秆相关指标则随种植密度增大而下降。昆仑14号抗倒伏相关指标先增后降,但整个生育期未发生倒伏;门源亮蓝各指标均显著降低,诱发倒伏现象提前发生,致使倒伏率增大、倒伏程度加剧。昆仑14号茎秆中性洗涤纤维、酸性洗涤纤维、半纤维素、纤维素和木质素等化学成分含量随密度增加先增后降,门源亮蓝各成分含量呈下降趋势,相对饲喂价值随密度增加呈现增高的趋势。综合抗倒伏特性与秸秆饲用特性,昆仑14号最佳种植密度为375×104株hm~(-2),门源亮蓝粮饲兼用时适宜密度为300×104～375×104株hm~(-2)。     

蔬菜幼苗叶面积快速测定方法筛选与优化

为得到一种快速且准确测定蔬菜幼苗叶面积的方法,以番茄幼苗为试材,以方格法为对照,研究扫描分析法、叶面积仪法、打孔称重法测定叶面积的准确性、精确性与测定速度,然后采用黄瓜、辣椒叶片及纸片的面积对测定结果进行验证,最后基于不同扫描分辨率对筛选出的方法进行优化。结果表明,相比叶面积仪法和打孔称重法,扫描分析法测定结果更接近真实值,且精度更高,用时更短。扫描分析法不同分辨率下测定结果无显著差异,且扫描分辨率越低所需测定时间越短。扫描分辨率50 dpi下的扫描分析法可作为一种快速准确测定蔬菜幼苗叶面积的方法。     

Effects of elevated CO2 concentration on bulbil germination and early seedling growth in Chinese yam under different air temperatures

The present study investigated the effects of elevated carbon dioxide concentration ([CO₂]) and air temperature on the germination of seed bulbils and the seedling vigour of two Chinese yam lines. Plants were grown under two [CO₂] levels, ambient and elevated (ambient + 200 μmol mol^?1), and two mean air temperature regimes, 22.2 °C (ambient + 1.4 °C) and 25.6 °C (ambient + 5.2 °C). Elevated [CO₂] did not affect bulbil germination under both air temperature regimes. During the early growth stage, the dry weight (DW) of leaves, vines, shoots, roots, belowground parts (roots + tubers) and whole plants were higher under elevated [CO₂] than ambient [CO₂] for both lines under the low- and high-temperature regimes. The values of vigour indexes (index I = germination % × seedling length and index II = germination % × seedling DW) were also higher under elevated [CO₂] than ambient [CO₂] for both lines. These results indicated that Chinese yam seedlings respond positively to elevated [CO₂] during the early growth stage. The above:belowground DW ratios were lower under elevated [CO₂] than ambient [CO₂] in seedlings with very small new tubers for both yam lines, indicating that elevated [CO₂] strongly affected the root growth in the early growth stage. The DWs of post-treatment seed bulbils were higher in the elevated [CO₂] under both air temperature regimes. The results showed that Chinese yam used a smaller amount of the reserves in seed bulbils under elevated [CO₂] than under ambient [CO₂].     

不同密肥条件下通粳981产量构成因子分析

[目的]探明不同生产条件下穗数、粒数、粒重对产量的影响。[方法]对通粳981在不同密度和肥料条件下形成的产量及其构成因子进行回归、相关和通径分析。[结果]穗数、粒数和粒重对产量均有极显著的增产效应,其增产效应从大到小依次为穗数、粒数、粒重,其中穗数对产量起主要作用;但在基本苗较多或施N量较大的情况下,穗数和粒数的增产作用都很重要。[结论]农业生产中可针对不同生产栽培条件,从产量构成因子中明确主攻目标,合理制定栽培技术措施,提高产量。